1. Motorola SC79948DTB, HF PA control. This IC controls the transmit power levels of the phone.
  2. Mosfet
  3. RX TX switch control (RX/TX on the other side)
  4. Contacts to Loudspeaker
  5. Bandfilter 215MHz
  6. PLL circuit for TX VCO
  7. SMOC Lucent DSP, Modulation, Demodulation and several control signals
  8. Analog EEPROM, for voice recognition
  9. Microphone
  10. DC-DC converter
  11. Connector to keypad
  12. Motorola 68338 in BGA144 package; Baseband controller based on 68k core
  13. Intel 28F800B3 Flash 512kx16
  14. Mitshubishi M5M51S16 SRAM, 64kx16

Micro Side

 
  1. Synthesiser
  2. 13MHz VCO
  3. RX filter Fc=1842.5MHz
  4. SAW filter Fc=947.5MHz
  5. RX filter 900MHz
  6. Antenna connector
  7. RF switch (duplexer) GaAs
  8. RX filter 1842.5MHz
  9. RF Power amplifier
  10. Contacts to battery
  11. Crystal 32.768kHz
  12. BDM interface
  13. Mosfet
  14. 74HC4066 quad analog switches
  15. Mosfet
  16. Bottom connector
  17. DC/DC convertor coil
  18. The GCAP (Global Control Audio Power) provides regulated power supplies for both the Logic and RF sections of the phone.
  19. SIM card holder
  20. STM 28C64 parallel EEPROM 4kx16
  21. Motorola 62C11; Bus interface Chip; contains the A/D and D/A, SIM controller, serial RS232 interface, battery sense.
  22. Dallas DS2401 enhanced Silicon Serial Number.

SIM Side